A5+ Wireless Speaker System

Tech_Specs

Bamboo

UPC: 852225007087

Satin Black

UPC: 852225007063

Hi-Gloss White

UPC: 852225007070
  • General Specifications

    Type
    Powered Bluetooth aptX HD speaker system

    Amplifier Type
    Class AB

    Power Output
    150 W peak power total (50 W RMS / 75 W peak per channel), AES

    Drivers
    5″ aramid fiber woofers

    0.75″ silk dome tweeters

    Inputs
    3.5 mm stereo mini-jack, RCA L/R, Bluetooth

    Outputs
    RCA variable line-out

    Input Voltages
    115/240 V, 50/60 Hz manually switchable

    SNR
    >95 dB (typical A-weighted)

    THD+N
    <0.05% at all power settings

    Crosstalk
    <50 dB

    Frequency Response
    50 Hz-22 kHz ±1.5 dB

    Input Impedence
    10K ohms unbalanced

    Protection
    Output current limiting, thermal over-temperature, power on/off transient protection, replaceable external main fuse

    Power Consumption
    Idle: 10 W
    Mute: 6 W
    Sleep: 4 W

  • Bluetooth Specifications

    Internal D/A Converter
    AKM AK4396

    Input Bit Depth
    24 bit (padded)

    Bluetooth Receiver Type
    Bluetooth 5.0

    Supported Codecs
    aptX HD, aptX, AAC, SBC

    Wireless Operation Range
    Up to 100 ft (30 m) typical

    Input Data Rate
    Determined by Bluetooth

    Wireless Latency
    ~30 milliseconds (ms)

  • Weights And Measures

    Dimensions (HWD)
    Left (active) – 10.75″ (27 cm) x 7″ (18 cm) x 9″ (23 cm)
    Right (passive) – 10.75″ (27 cm) x 7″ (18 cm) x 7.75″ (20 cm)

    Weight
    Left (active) – 15.4 lb (7 kg)
    Right (passive) – 9.6 lb (4.4 kg)

    Total Shipping Weight
    31 lb (14 kg)

    Shipping Box Dimensions (LWH)
    22″ (56 cm) x 11.5″ (29 cm) x 15″ (38 cm)

  • Environmental Requirements

    Operating temperature: 32 degrees F to 95 degrees F
    Non-operating temperature: -4 degrees F to 113 degrees F
    Relative humidity: 5% to 95% non-condensing

  • Materials And Construction

    0.5″ (13 mm) thick MDF cabinets
    5″ (130 mm) aramid fiber woofers with advanced voice coils
    0.75″ (20 mm) silk dome tweeters with neodymium magnets
    Toroidal power transformer

  • Cabinets

    To minimize unwanted resonances and distortion, Audioengine cabinets have thick high-resin MDF walls with extensive internal bracing. Heavy internal sound-damping material is used to reduce unwanted sound reflections inside the cabinet. All cabinet edges are rounded which look great and reduce high-frequency diffraction effects on the front baffles. The A5+ cabinet contains tuned, rear-port slots.

  • Furniture Grade Finishes

    The A5+ cabinets are available in several handsome finishes, including bamboo veneers as well as satin black and high-gloss white paint, offering a wide choice for complementing room furnishings.

  • Custom Components

    Audioengine designs and manufactures our own tweeters, woofers, and other critical components. In other words, these are not “box built” speakers with off-the-shelf parts but custom-designed to our specifications. What we do not fabricate directly in our factory we have made to our designs (parts such as transformers, magnets, and wiring harnesses, for example). The cabinets, drivers, bass port designs, amplifiers, and crossovers are all painstakingly tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires much less power than passive speakers and a separate integrated amplifier or similar A/V components.

  • Based On Studio Monitor Designs

    Studio monitor speakers are used by producers and engineers in recording and production studios. They are designed with a theoretical flat frequency response which allows the engineer to create a final mix in such a way that the recorded music will sound good on most other speakers. Although Audioengine speakers are not designed to be up-close “nearfield” studio monitors, we do carry over much of the same higher-end technology, components, and design philosophy for all Audioengine speaker systems.

  • Efficient Integrated Design

    The speaker cabinets, drivers, innovative bass port designs, amplifiers, and passive crossovers are all critically tuned together for each Audioengine model. This, in turn, makes for a much more efficient system that requires less power than passive speakers and a separate integrated amplifier or similar A/V components. We build all this goodness into the left speaker cabinet to make it super-easy to connect your smartphone, tablet, computer, TV, network player or any other audio product.

  • High-quality Bluetooth Audio

    The Bluetooth built into the A5+ powered speakers features aptX HD coding which is an advanced Bluetooth audio codec with very impressive sound. And even if your phone or tablet does not have aptX HD, the A5+ Bluetooth solution is backwards-compatible with SBC and AAC codecs, as well as standard aptX, so you can wirelessly stream music from any Bluetooth-enabled device and still enjoy all your music. High-fidelity Bluetooth aptX HD that really works and sounds great. Here is why:

    Extended-range wireless.
    Most Bluetooth implementations have very limited range, typically within just one room. But with careful signal management circuitry and antenna tuning, we offer a superior solution that has up to 3 times the range of standard Bluetooth for multi-room use, with no degradation in audio quality.

    24 bit DAC
    The A5+ include an AKM AK4396A DAC, widely known for its low-noise and high-fidelity. But for Bluetooth the AK4396A is used as an upsampling DAC and will pad all bit depths to 24 bit, achieving a higher signal-to-noise ratio and lower noise floor. Due to the high signal-to-noise specs of the AK4396A, the fact that digital signal is upsampled to 24 bit as well as the added benefit of onboard triple redundancy power source conversion and filtering, the A5+ Bluetooth implementation presents impressive low noise and low distortion characteristics with a noticeable improvement over other Bluetooth devices.

  • Amplifier Design

    The amplifiers in powered Audioengine speakers are located in the left speaker and are a conservatively-rated class A/B analog monoblock design. This is a more traditional speaker/amplifier marriage which provides excellent quality audio and greater flexibility. All circuit boards for the power and preamp sections are vertically mounted for maximum mechanical shock protection.

  • Driver Designs

    Audioengine uses audiophile-quality, ferrofluid-cooled silk dome tweeters with neodymium magnets. Silk tweeters hold up well under high power and the edge-driven design gives very smooth response. The woofers are aramid fiber woven glass composite with rubber surrounds. Aramid fiber is obviously very strong, which means that the woofer retains its shape when being driven at high levels. The speaker materials and construction are robust enough to stand up to some serious thrashing, so speaker grills are not needed and they will sound and look great after many years of use.

  • Power Transformers

    Power transformers are a large contributor to the overall audio performance, especially in the low end. Again, no off-the-shelf parts. Audioengine uses gapless core toroidal transformers which have a tighter radiated magnetic field, directly translating to lower noise. They are lighter than standard, lower-cost transformers and also generate less heat.

  • Shielding

    Both drivers are directly video shielded and allow the user to place the speakers within a few inches of a video monitor. This shielding also offers protection for hard-drive digital music players.

Wishlist Products

You have no items in wishlist.